Home > Stove Repair Raleigh

If you’re having problems with your gas or electric stove like if the stove pilot light doesn't stay on or your stove burners don't get hot  you need professional help.  Call our toll free number and we will take care of everything. Raleigh Stove Repair is available 24/7 at:

919 827-0040

For parts only: 800-370-9281

Please note that all purchased stove parts are shipped directly to you.

We repair all stove brands:

We provide stove repair in Raleigh and the surrounding areas. Below, you will see the list of the areas that we service:

Below is information about extending the life of your stove and how you can save money on your utility bills by using your stove efficiently. Remember not to do the stove repairs yourself, since stove repairs require professional experience, tools, and training. And remember that repairs of gas or electric systems can become very dangerous if you don't have the necessary knowledge and experience. Call us any time day or not for experienced, professional stove repair help:

919 827-0040

 STOVE H E L P F U L H I N T

Preventing Cook top Element Failure in an Electric Stoves
Failure to insert all stove elements fully into the burner block receptacle of electric stove can cause carbon to form in the gap between the terminals of the stove element and burner block. Eventually this carbon will create a wall of insulation oil between the stove parts, and the stove element will fail to heat.
To prevent this damage, connect an stove element in the following way:
1. When inserting the terminals into the burner block, hold the element as closely parallel to the stove as possible.
2. Press the stove elements firmly until they are correctly seated all the way into the burner block.

REPLACING A DEFECTIVE ELECTRIC STOVE COOKTOP ELEMENT

PROBLEM: One area of a stove cook top element on an electric stove glows more brightly than the rest of its surface.

1. Cooking elements of most electric stoves are resistance wire made of nickel and chromium
2. Resistance wire that is inside a sheath containing magnesium oxide.
3. A glowing spot indicates that the sheath has broken down in that area, and the exposed wire is burning hotter than the rest of the stove element. The element will soon fail completely, and any cookware coming into contact with the red-hot spot may be scorched.
4. To replace a stove top element, first make sure the stove element is cold, then grasp the element and carefully pull it out of the stove. Most elements are plugged into a stove burner tugging gently oil the element should cause it to come free. Buy a new stove element of the same type from an stove parts dealer. Plug it securely into the stove burner block by holding it as low as possible and pushing in forcefully.
5. The stove terminals of some elements are secured to wires with screws. If you have this type of element. Turn off current to the stove, and carefully pull the element toward you until the terminals are revealed. Loosen the terminal screws, disconnect the wires from the damaged element, and screw a new stove element to the wires.
   
   TESTING AN ELECTRIC STOVE COOKTOP ELEMENT
   
   PROBLEM: One element on your electric range does not get warm.
   You must test the non working element to make certain it, and not some other part, has failed. To do so, follow these steps:
   1. Most electric ranges have two cook top elements that measure 51/2 inches in diameter, and two that measure V, inches in diameter. To test a nonworking element, first he sure the burner elements are turned off and are cold. Then transfer the nonworking element into the burner block of a working element of the same size. Turn oil the power. If the element still doesn't glow, the defective element must be replaced.
   2. If the nonworking element is one of a kind in size, remove the element from the range. Hold the probes of an ohmmeter to the ends of the element. If the ohmmeter need points to infinity (x), the element is defective and must be replaced.

The tips and information that we have listed here is strictly for educational purposes. Because it is necessary to have extensive training with stove repairs, we encourage you to hire a certified technician to do any related repairs. To reach one of our highly-qualified technicians, please call us at the following number:

919 827-0040